16
3.5.3 Calibration log
Click on the
Cal Log
button to see, you guessed it, the calibration record. This is a lifetime, permanent record of all
calibration changes for your Scuba (4.4).
3.5.4 Sensors and parameters list
Click on the
Sensors and parameters list
button enables the parameters listed by clicking the box (to the left of the
parameter name) to produce the check mark. Clicking on a box with a check mark removes the check mark and disables
that parameter.
Note that if you enable a parameter but don’t have a sensor for that parameter, it would be a huge coincidence if the
data were accurate.
The order of the enabled parameters in this list is the order in which the parameters will appear in your data display
home page, the order in which they will appear in logging files, and the order in which they will appear in snapshot files.
You can change the parameter order by clicking on (i.e. highlighting) the parameter name and then moving the
highlighted name up or down by clicking on the up- and down-arrows at the bottom of the screen.
