3
Changing IBP batteries in Scuba 75 models and activating logging
................................................................... 32
Changing IBP batteries in Scuba 90 and 105 model and activating logging
....................................................... 33
Logging with an external battery pack
Logging redundantly with telemetry
Connecting the Amphibian 3 with a cable
Establish Bluetooth communication
Example screens from small-screen data displays
.......................................................................................... 39
Our three most frequently asked questions
As this manual was written, these documents were on the flash drive next to the Scuba control software:
1
M-Calibrating Ion-Selective Electrodes
2
M-Calibrating the Scuba Turner fluorometers
3
M-Cleaning pH sensors
4
M-Eight ways to power a Scuba
5
M-Field calibration crude oil sensor
6
M-Four primary operating modes for Eijkelkamp multiprobes
7
M-Scuba cable wiring
8
M-Scuba integrated SDI-12 and MODBUS output operating instructions
9
M-Scuba logging with uninterrupted external power supply
10
M-Scuba MODBUS communication protocol
11
M-Scuba RS-232 communications protocol
12
M-Scuba SDI-12 adapter
13
M-Standardizing Eijkelkamp’s Turner fluorometers
14
M-Warranty Scuba water quality probes
Do you need help?
Royal Eijkelkamp has the best customer service in the multiprobe market, so there’s no reason to get bogged down with
a problem. We welcome your call at +31 313 880 200, or email at
