10
USER MANUAL
ORTHOVET PLUS BATTERY DRILL SYSTEM
T +49 7461 96 580 0 | F + 49 7461 96 580 90 | [email protected] | www.eickemeyer.com
Removing the Attachments
Figure 14
Turn the rotary ring with grooves clockwise on the handpiece and pull the attachment out from the coupling (Fig. 14).
Precautions
• To prevent injury, the power tool must be switched “OFF” with the safety system during each manipulation.
• Only use original attachments and tools from EICKEMEYER®. Damage that arises from using attachments and tools made
by other manufacturers is not covered by the warranty.
• If the instrument is not needed during the operation, lay down the handpiece to make sure it is stable and cannot tip over.
To mount or remove attachments and cutting tools, always place the drive unit in an upright position on the sterile table.
Item no. Description
Maximum Speed Torque
195078
Jacobs Chuck with key, cannulated
, clamping range Ø 0,6 – 2,5 mm
0 – 1,000 rpm
≥ 1.2 NM
195079
Quick Chuck for K-wires, cannulated
, clamping range Ø 0,6 – 2,6 mm
0 – 1,000 rpm
≥ 1.2 NM
195080
AO-Quick Chuck
0 – 1,000 rpm
–
195081
Oscillating Saw-Chuck
0 – 11,000 rpm
≥ 3.0 NM
