background image

9

USER MANUAL 

ORTHOVET PLUS BATTERY DRILL SYSTEM 

T +49 7461 96 580 0 | F + 49 7461 96 580 90 | [email protected] | www.eickemeyer.com

Additional Information

Do not expose batteries to heat or fi re. Avoid storage in direct sunlight. Keep the charger and the batteries clean and in a cool 
and dry place. Danger of fi re, explosion and burns. Do not disassemble, crush, heat to over 60 °C / 140 °F or burn. 

Notes

For more information, see the “Care and Maintenance” section on page 15.
Please read the guidelines for the transport of nickel-metal hydride (NiMH) for the return transport to the  EICKEMEYER® 
Service Center.

3.  ATTACHMENTS / CHUCKS

General Information

The OrthoVet Plus System offers a broad range of attachments. All attachments has color-coded rings, so that they can easily 

be identifi ed.

Mounting the Attachments

Figure 13

195079

195081

195078

195080

Insert the attachment into the attachment coupling (Fig. 13). If the positioning pins do not lock into place right away, twist 
the attachment a bit to the right or left until it locks into the correct position. Check if the attachment is seated correctly by 
gently pulling on it.

Summary of Contents for 195070





























Reviews: