4
USER MANUAL
ORTHOVET PLUS BATTERY DRILL SYSTEM
T +49 7461 96 580 0 | F + 49 7461 96 580 90 | [email protected] | www.eickemeyer.com
1. INTRODUCTION
General Information
The OrthoVet Battery Drill System consists of
• Handpiece, cannulated
• Jacobs Chuck
• Quick Chuck for K-Wires, cannulated
• AO-Quick Chuck
• Oscillating Saw-Chuck
Accessories
• Charging station
• Batteries
• Funnel for handpiece
• Show case for transportation
• Container
• Tray
Intended Use
The OrthoVet Plus is a battery-driven power tool for use in veterinary osteosynthesis involving surgical procedures such as
drilling, burring, reaming, pin and wire placement, cutting of bone and hard tissue in small animals.
The keyless coupling (also used for saw blades) enables the exchange of different attachments in just a few seconds. Operation
of the OrthoVet Plus is possible in clockwise and counterclockwise direction as well as in oscillation cutting operation with
the saw attachment.
Safety Instructions
The surgeon has to assess whether the machine is suitable for the respective machine on the basis of the performance
limitations of the machine, the ancillary equipment and the cutting tool with respect to bone strength / anatomical situation
as well as the handling of the machine, the attachment and the cutting tool Application is suitable. Furthermore, the
contraindications for the implant must be taken into account. Please read the corresponding “surgical techniques” of the used
implant system.
The OrthoVet Plus is only to be used for patient treatment after careful consultation of the instructions for use. It is
recommended that an alternative system is available to use during application, as technical problems can never be completely
ruled out.
The OrthoVet Plus is designed for use by physicians and trained medical personnel.
Do not
use any component if damage is apparent.
Do not
use any component if the packaging is damaged.
Do not
use this equipment in the presence of oxygen, nitrous oxide or a mixture consisting of fl ammable anesthetics and air.
To ensure the proper operation of the tool, only use EICKEMEYER® original accessories.
Before the fi rst and every subsequent use, power tools and their accessories / attachments have to run through the complete
reprocessing procedure. Protective covers and foils must be fully removed before sterilization.
For the tool to function properly, EICKEMEYER® recommends cleaning and servicing it after each use in accordance with the
process recommended in the chapter “Care and Maintenance”. Compliance with these specifi cations can considerably extend
the service life of the tool. Only use EICKEMEYER® oil, (item no. 563706) to lubricate the tool.
