Printer Operations
Pro 32r Operations Guide
129
6.9.4
Winding or Collecting the Media
1.
Load a media core to the front air shaft. The media core must be at least as wide as the media.
2.
Load the air shaft to the printer, and then close the chuck.
3.
Center the core to the media and lock it in place by pumping air to the air shaft’s air inlet.
4.
Close the pinch roller.
5.
Advance the media to reach the front air shaft and attach the media’s edge to the core. You can either paste it with paper masking
tape, or by winding some media.
for a table with the media parameters to set before printing.
