Printer Operations
Pro 32r Operations Guide
110
3.
Choose the
Settings
button.
Figure 6-6 : Remaining Media Length Dialog Box
4.
Enter loaded media length for each roll. Choose
OK
. If there is insufficient media for the job(s), an appropriate message appears.
Figure 6-8
The software counts (in the background,) the amount of
media that has been used. At the end of the job, choose
in the Media Settings window. The signature is
stamped on the remaining Media.
If you don’t set the remaining media length, a confirm/
cancel prompt appears.
Figure 6-7 : Signature Stamped on Remaining Media
