EFI Pro 32r Operation Manual Download Page 111

Page: 111 / 168

Printer Operations

Document ID: OMM-00165 Rev. C

Pro 32r Operations Guide

111

The following settings can be changed during printing:

Setting

Can be changed in …

Nozzle Test

(Fire-all At Home Position)

The Control Panel

Pause the printer.

Purge and wipe the print heads.

From the Fire All dialog box, in the At Home Position, choose the Fire button.

Choose OK.

Free-Fall Continuous Collec-

The Control Panel (If the option is activated.)

Print Tension Power

The Control Panel

Advance Fine Tuning

The Control Panel

Calibrations

The Control Panel

Printer Status

The Printer Status dialog box (accessed by double-clicking the printer status bar, to the left of the

UV Status indicator in the Control Panel).

Increase/Decrease UV Power

The Printer Status dialog box

Image Position

The Printer Status dialog box (Left – Right, forward – backward).

Step & Repeat (in Y) Specify

number of copies.

The Job Settings dialog box.

If you have specified a Gap, then it will appear in subsequent copies.

Carriage Movement Margin

The Preferences dialog box.

6.4

Changing Settings During Printing

Summary of Contents for Pro 32r









































































































































































Search results

Summary of Contents for Pro 32r

Reviews:

Related manuals for Pro 32r

Brands by name

Popular brands

EFI Pro 32r, Operation Manual

Search results

Summary of Contents for Pro 32r

Reviews:

Related manuals for Pro 32r

Brands by name

Popular brands