Effekta ACX11MST1K0000XL, Operating Manual

Page: 61 / 77

UPS MTD-XL Operation
MTD series 61
7.1.4 Configuration of the UPS outputs
The UPS outputs are divided into two segment groups (LS1 and LS2).
1 UPS output LS1
2 UPS output LS2
Fig. 7-1 - 1 Segment groups - UPS output
You can activate or deactivate these segment groups individually.
To configure the segment groups, follow these steps:

Press the "Enter" button for 3 seconds. The UPS switches into settings
mode.

Select either "LS1" or "LS2" with the "Select" button.

Press the "Enter" button for one second. The setpoint starts blinking.

You can now activate or deactivate the individual segment group with the
"Select" button.
Please also see the table in chapter 7.1.2 UPS settings .

Press the "Enter" button for three seconds or the "ON / OFF button" for 0.5
seconds to exit the settings menu.