Effekta ACX11MST1K0000XL, Operating Manual

Page: 58 / 77

UPS MTD-XL Operation
MTD series 58
7. Operation
7.1 Operation of the UPS
The operator of the UPS-system must always adhere to the instructions
in this operating manual. The operator may only carry out the following
measures and must always exercise particular care:

Use of the operating controls: switching-on, starting and switching-
off the UPS.

Reading of the display messages and interpretation of the acoustic
warning signals.

Triggering the test mode.

Using the communication interface, whereby the connection to the
PC or other systems must already be established for UPS-devices
with permanent wiring.
Due to the extensive protective functions the UPS-system performs in re-
lation to the appliance/s, the UPS operates fully automatically. The opera-
tor only carries out the switching-on and starting or switching-off of the
device. In addition, a data exchange can take place via the communica-
tion interface or the SNMP-adapter, however, this is not absolutely nec-
essary for the general operation of the system.
7.1.1 UPS operating modes
Normal operating mode:
In normal operating mode the UPS operates with an input voltage of + / - 20 %.
Generator mode:
In generator mode the UPS operates with an input frequency between 40 Hz
and 70 Hz. Outside of this range, the UPS switches to battery mode.