Effekta ACX11MST1K0000XL, Operating Manual, Page: 17 / 77

UPS MTD-XL Safety Instructions
MTD series 17
2.5 Connection
The UPS may only be connected to a grounded isolated ground recepta-
cle or if connected via terminals, the protective earth conductor must be
connected without fail. The device may not be used without the PE under
any circumstances.
The socket for the domestic installation must be easily accessible and
in proximity to the UPS. Keep the cable length as short as possible in the
case of permanent wiring.
During generator operations the pole-correct connection of the UPS must
be ensured.
For the connection of the UPS to the socket of the domestic installation,
only a power cable that is VDE-approved and labelled CE may be used. In
the case of permanent wiring, an appropriate cable has to be used.
For the connection of the appliances with the UPS only a power cable
that is VDE-approved and labelled CE may be used. In the case of perma-
nent wiring of the appliances, an appropriate cable has to be used.
The safeguarding of any appliance must always be immediately in front of
an appliance and may never be done centrally in front of the UPS.
Never operate any household devices or tools like e. g. fan heaters, vac-
uum cleaners, electric drills, toasters, etc. with the UPS.
Do not connect any appliance to the UPS that could overload the device
(e.g. laser printer).
The sum total of the earth fault currents of all appliances connected to
the UPS may not exceed 3.5 mA.
Keep the connecting cables as short as possible and always install them
correctly. Avoid hazards to the cable like tripping, crushing, clipping etc.
For the connection of the appliances with the UPS only a power cable that is
VDE-approved and labelled CE, with an appropriate cable cross-section may
be used. The safeguarding of any appliance must always be immediately in
front of an appliance and may never be done centrally in front of the UPS. Do
not connect any appliance to the UPS that could overload the device. (Bear in
mind the high start-up currents).