BO08A01KNXFI01010002.DOC
Din Rail 8 Output Module– Product Handbook
22/51
Eelectron SpA, Via Magenta 77/22, I-20017 Rho (MI), Italia
+39 02.9316681 +39 02.93507688
[email protected] www.eelectron.com
BO08A01KNXFI01010002.DOC
C.F. e P.IVA 11666760159
Capitale sociale: 800.000,00€ interamente versato
Tribunale di Milano 359157-8760-07
CCIAA Milano 148549
KNX PARAMETER
SETTINGS
Timing can be stopped
True
False
This allows you to set the behaviour of the device when it receives a OFF command:
True
On receiving a OFF command, the device immediately
executes the command and switch off the relay without waiting
the end of the timing phase
False
On receiving a OFF command, the device ignores the
command and continues the timing phase; the load is
deactivated at the end of the set time and it is not possible to
deactivate it using a bus command.
Warning Function
True
False
Warning Time ( seconds before time ends)
15 sec.
30 sec.
1 minute
2 minutes
Switch Off Time
1,0 sec.
1,5 sec.
2,0 sec.
Here you can set the warning time before the deactivation of the stairway light function, upon
which the device will consequently signal the imminent termination of the stairway light function by
switching off, for a brief time, the light.
Duration of relay timing can be stopped with an OFF command.
1
0
Telegram
NO
close
Normally
Open
NO
open
Timing