EDNord QMS magicolor, User Manual

Page: 409 / 446

resource. Regardless of its resource, a font can be
selected by its attributes.
resource id: 0 to 6 (identifies one of the possible locations for
downloaded objects). Default: internal system disk. If
no resource item is provided, the internal default
location is used; otherwise, this parameter, which must
be provided, specifies one of the alternate locations.
For most QMS printers, resource 6 is the internal
system disk.
object code: 0-32767 (assigns a code to an object such as a font,
macro, or pattern).
%%IncludeFeature:font (font name)
Purpose: Specifies the default font to use. Fonts are identified by
the names shown above. Only the resident fonts may
be selected (the available set varies from printer to
printer). An asterisk * in the name indicates that a font
is scalable, and that a point size needs to be applied
using the pointsize command. The value selectbyid
indicates that the default font ID or unique font index
(set by the fontid command) will be used for default
font selection. Selecting a bound, bitmap font overrides
the default settings for symbol set and point size. An
unbound font uses the specified default symbol set if
possible, while a scalable font uses the default font size.
font name: courier12times*blditalic
courier12bolduniv*
courier12italicuniv*italic
courier10univ*bold
courier10bolduniv*blditalic
courier10italicunivcond*
lineprinter
univcond*italic
times*univcond*bold
times*italicunivcond*blditlc
times*bold
selectbyindex
%%IncludeFeature:fontid (index #)
Appendix D
A d d i t i o n a l T e c h n i c a l I n f o r m a t i o n D - 2 1
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500