EDNord QMS magicolor, User Manual

Page: 301 / 446

CAUTION: If you connect to this printer an external hard disk you
previously used with an earlier QMS Crown printer, this QMS
magicolor or magicolor Plus software automatically reorganizes
the files on the external hard disk when the printer is turned off and
back on. Once this reorganization is done, the files on the hard disk
can no longer be accessed if the hard disk is reattached to an earlier
QMS Crown printer. The printer release number is indicated on the
status and start-up pages.
This reorganization takes time. Don’t interrupt the reorganization,
because all files on the disk might be lost.
NOTE: If an error occurs during these operations, an error
message displays until you press the Menu key. You must
then restart the operation from the beginning. Two error
messages you may see are
READ FAILURE
(the disk
has encountered a read error) and
WRITE ERROR
(either
the hard disk had a write error or there is no room for data
on the hard disk or in RAM).
Chapter 8
P r i n t e r O p t i o n s 8 - 4 3
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500