EDNord QMS magicolor, User Manual

Page: 163 / 446

CAUTION: If you connect to this printer an external hard disk you
previously used with an earlier QMS Crown printer, this QMS
magicolor or magicolor Plus printer software automatically reor-
ganizes the files on the hard disk when the printer is turned off and
back on again. After this reorganization, the files on the hard disk
can no longer be accessed if the hard disk is reattached to the earlier
QMS Crown printer. This reorganization takes time. Don’t inter-
rupt the reorganization, because all files on the disk might be lost.
Administration/Disk Operations/Install Option
The Install Option command is used to add options, such as fonts
and emulations, to the hard disk. See “Installing an Optional Card
Font or Emulation” in chapter 8 for more details.
Administration/Disk Operations/Remove Option
The Remove Option command is used in removing options
previously installed on the hard disk. Selecting this option removes
all the files that are a part of the option. See “Removing an Optional
Card Font or Emulation” in chapter 8 for more details.
Administration/Disk Operations/Format Disk
The Format Disk command is used to format a hard disk.
If the
FORMAT FAILED
message displays in the message window
during the Format Disk operation, the disk cannot be used. Press
the Menu key to remove the message and contact your QMS
vendor. See “Formatting the Internal Hard Disk” and “Formatting
an External Hard Disk” in chapter 8 for more details.
Administration/Disk Operations/Spool Overflow
The Spool Overflow submenu allows you to specify which disk
and how much disk space is to be used to spool print jobs when the
job cannot be accommodated by RAM. Memory for spool buffers
is defined in the K Mem for Spool menu option (in the
Administration/Memory menu, which is explained earlier in this
Chapter 4
P r i n t e r C o n f i g u r a t i o n 4 - 5 3
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500