manualshive.com logo in svg

EDNord QMS magicolor, User Manual

Introducing the EDNord QMS magicolor User Manual - your comprehensive guide to maximizing the potential of this incredible product. Available for free download from manualshive.com, this manual empowers users with step-by-step instructions and insightful tips to navigate and optimize their magicolor experience effortlessly.

Share
Download
background image

Installing . . . . . . . . . . . . . . . . . .  2-46, 4-53
Memory . . . . . . . . . . . . . . . . . . . . . . . . .  B-8
Network interfaces . . . . . . . . . .  1-16, 4-28
Printer . . . . . . . . . . . . . . . . . . . . . . . . .  1-16
Removing . . . . . . . . . . . . . . . . . . . . . .  4-53
Security card . . . . . . . . . . .  1-14, 8-13, B-8
SIMMs. . . . . . . . . . . . . . . . . . . . . . . . . . B-8
Spool overflow . . . . . . . . . . . . . . . . . .  4-53
Startup . . . . . . . . . . . . . . . . . . . . . . . . .  4-39
Token-Ring interface . . . . . . . . . . . . . . B-8
Updated list . . . . . . . . . . . . . . . . . . . . . . B-8
Warranty considerations . . . . . . . . . . . . B-9

Orientation

Media. . . . . . . . . . . . . . . . . . . . . . . . . .  4-18

Orientation menu . . . . . . . . . . . . . . . . . .  4-18
Origin (HP-GL). . . . . . . . . . . . . . . . . . . .  4-32
OUT OF OIL . . . . . . . . . . . . . . . . . . . . .  6-12
OUTER JAM . . . . . . . . . . . . . . . . .  9-3, 9-14
Output tray

Capacity. . . . . . . . . . . . . . . . . . . . . . . . . B-6
Media levels . . . . . . . . . . . . . . . . . . . .  6-26

Output, collating . . . . . . . . . . . . . . . . . . .  5-12
Outputbin, naming . . . . . . . . . . . . . . . . .  4-48

P

Packing materials, in printer . . . . . . . . . . .  2-6
Page Description Languages

See Emulations

Pantone POCE . . . . . . . . . . . . . . . . . . . .  7-11
Pantone Professional Color Toolkit . . . .  7-14
PANTONE®* Colors . . . . . . . . . . . . . . .  1-11
Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  B-5

Cassette . . . . . . . . . . . . . . . . . . . . . . . . .  4-6
Envelopes . . . . . . . . . . . . . . . . . . . . . . .  5-8
Filling cassette. . . . . . . . . . . . . . . . . . .  2-38
Imageable region . . . . . . . . . . . . . . . . . . B-5
Laser . . . . . . . . . . . . . . . . . . . . .  1-14, 5-11
Laser Print . . . . . . . . . . . . . . . . . . . . . .  5-11
Loading . . . . . . . . . . . . . . . . .  2-41, 5-2, 5-5
Lower cassette . . . . . . . . . . . . . . .  1-17, 8-1
Margins . . . . . . . . . . . . . . . . . . . . . . . . .  B-5
Media menu. . . . . . . . . . . . . . . . .  4-6, 4-17
See Paper jams
Plain. . . . . . . . . . . . . . . . . . . . . .  1-14, 5-11
Selection . . . . . . . . . . . . . . . 4-6, 4-17, 5-11
Sizes . . . . . . . . . . . . . . . . . . . . . .  1-14, B-5
Storage. . . . . . . . . . . . . . . . . . . . . . . . . . B-6
Types . . . . . . . . . . . . . . . . . . . . .  1-14, 5-11

Paper cassette

Capacity . . . . . . . . . . . . . . . . . . . . . . . .  B-6
Filling . . . . . . . . . . . . . . . . . . . . . . . . .  2-38

Paper exit plates, cleaning. . . . . . . . . . . .  6-37
Paper exit rollers, cleaning . . . . . . . . . . .  6-37
Paper feed cassette

See Paper cassette

Paper jams

Error recovery . . . . . . . . . . . . . . . . . . .  9-17
Jam recovery . . . . . . . . . . . . . . . . . . . .  1-14
Message stays on . . . . . . . . . . . . . . . . .  9-17

Paper LED . . . . . . . . . . . . . . . . . . . . . . . . .  4-5
Paper type (HP-GL) . . . . . . . . . . . . . . . .  4-32
Paper-feed roller, cleaning . . . . . . . . . . .  6-38
Parallel cable pinouts

 Dataproducts . . . . . . . . . . . . . . . . . . .  B-16
Centronics . . . . . . . . . . . . . . . . . . . . .  B-13

Parallel interface . . . . . . . . . .  3-10, 4-25, B-3

Data bits . . . . . . . . . . . . . . . . . . . . . . . .  4-26
Default interface . . . . . . . . . . . . . . . . .  3-16
Emulations . . . . . . . . . . . . . . . . . . . . . .  4-25
End job mode. . . . . . . . . . . . . . . . . . . .  4-26
Min K Spool . . . . . . . . . . . . . . . . . . . .  4-25
Mode . . . . . . . . . . . . . . . . . . . . . . . . . .  4-25
PS protocol . . . . . . . . . . . . . . . . . . . . .  4-26
Spool timeout. . . . . . . . . . . . . . . . . . . .  4-25
Test file . . . . . . . . . . . . . . . . . . . . . . . .  3-16
Testing communication . . . . . . . . . . . .  3-16

Parity . . . . . . . . . . . . . . . . . . . . . .  3-18 - 3-19

Serial interface. . . . . . . . . . . . . . . . . . .  4-23

Park Avenue . . . . . . . . . . . . . . . . . . . . . .  7-17
Password

Administration menu . . . . . . . . . . . . . .  4-16
Operator Control menu . . . . . . . . . . . .  4-15

PC

Driver. . . . . . . . . . . . . . . . . . . .  3-11 - 3-12
PS Executive Series Utilities . . . . . . . .  3-11
Software. . . . . . . . . . . . . . . . . . . . . . . .  3-12
Testing communication . . . . . . . . . . . .  3-16
Testing parallel port. . . . . . . . . . . . . . .  3-16
Testing serial port . . . . . . . . . . . . . . . .  3-17
Troubleshooting. . . . . . . . . . . . . . . . . .  9-22

PC checklist. . . . . . . . . . . . . . . . . . . . . . .  9-22
PDF

Macintosh . . . . . . . . . . . . . . . . . .  3-6 - 3-7
PC . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-15

PDLs

See Emulations

PDX. . . . . . . . . . . . . . . . . . . . . . . . . .  3-6, 3-8

 

 

 

I - 1 2

I n d e x

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

Summary of Contents for QMS magicolor































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for QMS magicolor

Oki B2200 Setup Manual preview
B2200
Brand: Oki Pages: 24
VAF instruments 247 Technical Manual preview
247
Brand: VAF instruments Pages: 24
3DP Workbench Manual preview
Workbench
Brand: 3DP Pages: 12
NEC 870 - SuperScript B/W Laser Printer Network User'S Manual preview
870 - SuperScript B/W Laser Printer
Brand: NEC Pages: 52
NEC SuperScript 1800 Quick Start Manual preview
SuperScript 1800
Brand: NEC Pages: 8
Panasonic KXPX2M - HOME PHOTO PRINTER Guía Rápida preview
KXPX2M - HOME PHOTO PRINTER
Brand: Panasonic Pages: 28
Panasonic KX-P8420 Reference Manual preview
KX-P8420
Brand: Panasonic Pages: 78
Panasonic KX-P7110 Network Setup Manual preview
KX-P7110
Brand: Panasonic Pages: 4
Panasonic KX-P1124 Manual preview
KX-P1124
Brand: Panasonic Pages: 2
Panasonic KX-CL400 Operating Instructions Manual preview
KX-CL400
Brand: Panasonic Pages: 9
Panasonic Jetwriter KX-CL500 User Manual preview
Jetwriter KX-CL500
Brand: Panasonic Pages: 32
GCC Technologies Elite 12N Network Manual preview
Elite 12N
Brand: GCC Technologies Pages: 63
gCreate gMax 2 PRO Unboxing And Setup Instructions preview
gMax 2 PRO
Brand: gCreate Pages: 9
GCC Technologies Elite XL-1208 Supplementary Manual preview
Elite XL-1208
Brand: GCC Technologies Pages: 9
GCC Technologies Elite XL-1208 Install Manual preview
Elite XL-1208
Brand: GCC Technologies Pages: 12
gCreate gMax 2 PRO User Manual preview
gMax 2 PRO
Brand: gCreate Pages: 21
GCC Technologies Elite XL User Manual preview
Elite XL
Brand: GCC Technologies Pages: 199
Xerox DocuColor 6060 Recommended Materials List preview
DocuColor 6060
Brand: Xerox Pages: 4

Brands by name

Popular brands

Load more brands