EDNord magicolor 5450 User Manual Download

Page: 48 / 208

Configuration Menu Overview

Entering the Password

If the print job selected in the

PROOF/PRINT

is a secured job, a

screen for entering the password appears. Follow the procedure described
below to type in the four-digit password specified from the printer driver.

Press the Up and Down keys to increase or decrease the first digit of the
password.

Press the Right key to move the cursor to the next digit.

Press the Up and Down keys to increase or decrease the second digit of
the password.

Continue these steps until all four digits of the password are specified.

Press the Menu/Select key.

The

PRINT/DELETE

selection screen appears.

If an incorrect password is entered,

INVALID ENTRY

appears and

the screen for entering the password appears again.

EDNord - Istedgade 37A - 9000 Aalborg - telefon 9633350

Summary of Contents for magicolor 5450

















































































































































































































Search results

Summary of Contents for magicolor 5450

Reviews:

Related manuals for magicolor 5450

Brands by name

Popular brands

EDNord magicolor 5450, User Manual

Search results

Summary of Contents for magicolor 5450

Reviews:

Related manuals for magicolor 5450

Brands by name

Popular brands