manualshive.com logo in svg

EDNord magicolor 5450, User Manual

Share
Download
EDNord magicolor 5450 User Manual Download Page 140

Cleaning the Printer

126

Cleaning the Laser Lens 

This printer is constructed with four laser lenses. Clean all lenses as 
described below. The laser lens cleaning tool should be attached to the rear 
side of the printer.

1

Open the printer’s front cover.

2

Align the marks at the bottom of 
the toner cartridge, insert the 
laser lens cleaning tool between 
the waste toner bottle and the 
yellow toner cartridge with the 
cleaning pad pointing down, and 
then slide it back and forth 2 or 3 
times.

3

Clean between each of the toner 
cartridges in the same way.

!"

The laser lens cleaning tool 
is included with the printer.
Safely store the laser lens 
cleaning tool so that it will not 
be lost.

4

Close the front cover.

5

Return the laser lens cleaning tool to its holder on the rear side of the 
printer.

EDNord - Istedgade 37A - 9000 Aalborg - telefon 9633350

Summary of Contents for magicolor 5450

















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands