Edimax ES-3124REM User Manual Download Page 90

Page: 90 / 98

4.1 Port Status

This page displays the status of each port.

Link Status: “

Down” and “Up” means “No Link” and “Link”

respectively.

InRate:

Displays the input rate control (100K/unit) setting

values.

OutRate:

Displays the output rate control (100K/unit) setting

values.

Enabled:

Displays the port is enabled or disable depended on

user settings. Enable will be displayed as “Yes”, disable will be
displayed as “No”. If the port is unlink it will be treated as “No”.

Auto:

Displays the port is link on which Nway mode: Auto ,

Nway_Force , Force.

Spd/Dpx:

Displays the port speed and duplex.

Flow Control:

In auto / Nway force mode, displays the flow

control status is enable or disable after negotiation.
In force mode, displays the flow control status is enable or
disable depending on user settings.

Summary of Contents for ES-3124REM



































































































Search results

Summary of Contents for ES-3124REM

Reviews:

Related manuals for ES-3124REM

Brands by name

Popular brands

Edimax ES-3124REM, User Manual

Search results

Summary of Contents for ES-3124REM

Reviews:

Related manuals for ES-3124REM

Brands by name

Popular brands