58
Create 802.1Q VLAN and add tagged /untagged member
ports to it
1.
Select
<Edit>
.
2.VLAN Name:
Type a name for the new VLAN.
3.VLAN ID:
Type a VID (between 2~4094). The default is 1.
There are 256 VLAN groups to configure.
3.Protocol VLAN:
Press
Space
key to choose protocol types.
4.Member:
Press
Space
key to choose VLAN members. There
are three types to select:
UnTagged
: this port is the member port of this VLAN group
and outgoing frames are NO VLAN-Tagged frames.
Tagged
: this port is the member port of this VLAN group and
outgoing frames are VLAN-Tagged frames.
NO
: The port is NOT member of this VLAN group.
5.
Press
Ctrl+A
go back action menu line.
6.
Select
<Save>
to save all configure value.
NOTE:
If the trunk group exists, you can see it (ex: TRK1,
TRK2…) after port26, and you can configure it as the member
of the VLAN or not.
Summary of Contents for ES-3124REM
