Edimax ES-3124REM, User Manual

Page: 36 / 98

36
4.8 Spanning Tree
The Spanning-Tree Protocol (STP) is a standardized method
(IEEE 802.1D ) for avoiding loops in switched networks. When
STP enabled, ensure that only one path at a time is active
between any two nodes on the network.
You can enable Spanning-Tree Protocol on web management’s
switch setting advanced item by selecting enable Spanning-Tree
protocol. We are recommended that you enable STP on all
switches ensures a single active path on the network.
1.You can view spanning tree information about the Root Bridge,
such as following screen.
2.You can view spanning tree status about the switch, such as
following screen.
3. You can set new value for STP parameter, then click Apply
button to modify.