74
3.1.3 Perport Configuration
1.
PortState:
Display spanning tree status about the switch for
per port as forwarding or blocking.
2.Select
<Edit>
.
3.
PathCost:
Specifies the path cost of the port that switch uses
to determine which port are the forwarding ports.
4.
Priority:
This means port priority. You can make it more or
less likely to become the root port.
5.Press
Ctrl+A
go back action menu line.
6.Select
<Save>
to save all configure value.
7.On the action menu line you can press
<Next Page>
to
configure port9 ~ port26, press
<Previous Page>
to return to
last page.
Summary of Contents for ES-3124REM
