38
4.9 Port Sniffer
The Port Sniffer is a method for monitor traffic in switched
networks. Traffic through ports can be monitored by one specific
port. That is, traffic goes in or out monitored ports will be
duplicated into sniffer port.
1.Roving Analysis State:
Press
Space
key to set sniffer mode as
Disable, Rx, Tx or Both.
2.Analysis Port:
It means sniffer port which can be used to see
all monitored port traffic. You can connect analysis port to Lan
analysier or netxray.
3.Monitored Port:
The ports you want to monitor. All monitor
ports’ traffic will be copied to analysis port. You can select max
25 monitor ports in the switch. You can choose which port want
to be monitored in only one sniffer mode.
Summary of Contents for ES-3124REM
