57
2.3.2 Create a VLAN Group
Create Port-based VLAN and add member/nonmember
ports to it
1.
Select
<Edit>.
2.VLAN Name:
Type a name for the new VLAN.
3.Grp ID:
Type the VLAN group ID. The group ID range is
1~26.
4.Member:
Press
Space
key to choose VLAN member.
There are two types to select:
a. Member: the port is a member port.
b. NO: the port is NOT a member port.
5.
Press
Ctrl+A
go back action menu line.
6.
Select
<Save>
to save all configure value.
NOTE:
If the trunk group exists, you can see it (ex: TRK1,
TRK2…) after port26, and you can configure it is the member
of the VLAN or not.
Summary of Contents for ES-3124REM
