19
4.2 Switch Settings
4.2.1 Basic
Description:
Displays the name of this management switch.
MAC Address:
The unique hardware address is assigned by
manufacturer (default).
Firmware Version:
Displays the switch’s firmware version.
ASIC Version:
Displays the switch’s Hardware version.
PCBA version:
Displays the switch’s PCBA version.
Serial number:
The serial number is assigned by manufacturer.
4.2.2 Module Info
Displays the module card informations.
Note
:
The module type will be 100/10Mbps for Fast Ethernet
Management Switch (1000/100/10Mbps for Gigabit Switch).
Summary of Contents for ES-3124REM
