32
(10) TEMP button
Press this button to choose whether your indoor unit will display the indoor set temperature, the
indoor ambient temperature, or the outdoor ambient temperature. Each time you press the TEMP
button, the unit will advance one step in the following cycle of settings:
When you land on
the “
” symbol with the remote control, the air conditioner will display the set
temperature. When you land on
the “
” symbol, the indoor unit will display the indoor ambient
temperature (the actual current temperature of the room). When you land on
the “
” symbol, the
air conditioner will display the outdoor ambient temperature. If you do not select a temperature
display setting within three (3) seconds of pressing the TEMP button the first time, the unit will
revert back to displaying the set temperature.
(11)
/
Button
These buttons correspond to Healthy and Scavenging modes, which are not included with this
model. Pressing these buttons will have no impact on the unit’s operation.
(12) I FEEL Button
The I FEEL function uses a temperature sensor located in the remote itself instead of the sensor
located in the indoor unit. Press this button once to turn on the I FEEL function, and the I FEEL
symbol
will be displayed. Once the I FEEL function is activated, the remote
control’s
temperature sensor will send the current temperature to the main unit every 10 minutes or each
time a different function button is pressed. Press th
e “I FEEL” button again to turn off the I FEEL
function.
(13) LIGHT Button
Press this button to turn the remote backlight on or off. You can activate the light whether the unit
itself is powered ON or OFF. When the unit is powered on it defaults to the Light On setting.
Note: When displaying the outdoor ambient temperature, the unit has a display range of 32° F
–
99° F (0° C
– 32° C). If the outdoor temperature goes above this range the unit will display 99° F
(32° C) and if the outdoor temperature drops below this range the unit will display 32° F (0° C).
Tip: When operating buttons on the cover of the unit please make sure the cover is closed
completely.