Edge-Core ES4524M-PoE, Management Manual, Page: 331 / 560

SNMP Commands
4-61
4
snmp-server
This command enables the SNMPv3 engine and services for all management clients
(i.e., versions 1, 2c, 3). Use the
no form to disable the server.
Syntax
[ no ] snmp-server
Default Setting
Enabled
Command Mode
Global Configuration
Example
show snmp
This command can be used to check the status of SNMP communications.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
This command provides information on the community access strings, counter
information for SNMP input and output protocol data units, and whether or not
SNMP logging has been enabled with the
snmp-server enable traps
command.
snmp-server user Adds a user to an SNMPv3 group GC 4-73
show snmp user Shows the SNMPv3 users PE 4-74
Console(config)#snmp-server
Console(config)#
Table 4-21 SNMP Commands (Continued)
Command Function Mode Page