
Authentication Commands
4-85
4
Example
show tacacs-server
This command displays the current settings for the server.
Default Setting
None
Command Mode
Privileged Exec
Example
Web Server Commands
This section describes commands used to configure web browser management
access to the switch.
ip http port
This command specifies the TCP port number used by the web browser interface.
Use the
no
form to use the default port.
Syntax
ip http port
port-number
no ip http port
port-number
- The TCP port to be used by the browser interface.
(Range: 1-65535)
Default Setting
80
Console(config)#tacacs-server key green
Console(config)#
Console#show tacacs-server
Remote TACACS server configuration:
Server IP address: 10.11.12.13
Communication key with TACACS server: *****
Server port number: 30
Console#
Table 4-32 Web Server Command
Command
Function
Mode
Page
ip http port
Specifies the port to be used by the web browser interface
GC
ip http server
Allows the switch to be monitored or configured from a browser GC
ip http secure-server
Enables HTTPS/SSL for encrypted communications
GC
ip http secure-port
Specifies the UDP port number for HTTPS/SSL
GC
Summary of Contents for ES4524M-PoE
