manualshive.com logo in svg

Edge-Core ES4524M-PoE, Management Manual, Page: 497 / 560

Share
Download
Edge-Core ES4524M-PoE Management Manual Download Page 497

LLDP Commands

4-227

4

lldp medtlv extpoe

This command configures an LLDP-MED-enabled port to advertise and accept 
Extended Power-over-Ethernet configuration and usage information. Use the 

no

 

form to disable this feature.

Syntax

[

no

] 

lldp medtlv extpoe

Default Setting

Enabled

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

This option advertises extended Power-over-Ethernet capability details, such 
as power availability from the switch, and power state of the switch, including 
whether the switch is operating from primary or backup power (the Endpoint 
Device could use this information to decide to enter power conservation 
mode). Note that this device does not support PoE capabilities.

Example

lldp medtlv inventory

This command configures an LLDP-MED-enabled port to advertise its inventory 
identification details. Use the 

no

 

form to disable this feature.

Syntax

[

no

] 

lldp medtlv inventory

Default Setting

Enabled

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

This option advertises device details useful for inventory management, such 
as manufacturer, model, software version and other pertinent information.

Console(config)#interface ethernet 1/1
Console(config-if)#no lldp medtlv extpoe
Console(config-if)#

Summary of Contents for ES4524M-PoE

















































































































































































































































































































































































































































































































































































Reviews:

No comments