Edge-Core ES3528MV2, Management Manual

Page: 1232 / 1480

C
HAPTER
39
| Multicast Filtering Commands
IGMP Filtering and Throttling
– 1232 –
E
XAMPLE
This example shows how to enable IGMP Authentication on all of the
switch’s Ethernet interfaces.
Console(config)#interface ethernet 1/1-28
Console(config-if)#ip igmp authentication
Console#
R
ELATED
C
OMMANDS
show ip igmp authentication
ip igmp filter
(Interface Configuration)
This command assigns an IGMP filtering profile to an interface on the
switch. Use the no form to remove a profile from an interface.
S
YNTAX
[ no ] ip igmp filter profile-number
profile-number - An IGMP filter profile number.
(Range: 1-4294967295)
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Interface Configuration
C
OMMAND
U
SAGE
◆
The IGMP filtering profile must first be created with the ip igmp profile
command before being able to assign it to an interface.
◆
Only one profile can be assigned to an interface.
◆
A profile can also be assigned to a trunk interface. When ports are
configured as trunk members, the trunk uses the filtering profile
assigned to the first port member in the trunk.
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#ip igmp filter 19
Console(config-if)#
NAS_PORT 5 User Port Number
FRAMED_IP_ADDRESS 8 Multicast Group ID
Table 159: IGMP Authentication RADIUS Attribute Value Pairs
Attribute Name AVP Type Entry