Edge-Core ES3528MV2, Management Manual

Page: 737 / 1480

C
HAPTER
20
| System Management Commands
Line
– 737 –
E
XAMPLE
To set the timeout to two minutes, enter this command:
Console(config-line)#timeout login response 120
Console(config-line)#
disconnect
This command terminates an SSH, Telnet, or console connection.
S
YNTAX
disconnect session-id
session-id – The session identifier for an SSH, Telnet or console
connection. (Range: 0-8)
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
Specifying session identifier “0” will disconnect the console connection.
Specifying any other identifiers for an active session will disconnect an SSH
or Telnet connection.
E
XAMPLE
Console#disconnect 1
Console#
R
ELATED
C
OMMANDS
show ssh (847)
show users (715)
terminal
This command configures terminal settings, including escape-character,
lines displayed, terminal type, width, and command history. Use the no
form with the appropriate keyword to restore the default setting.
S
YNTAX
terminal { escape-character { ASCII-number | character } |
history [ size size ] | length length | terminal-type { ansi-bbs |
vt-100 | vt-102 } | width width }
escape-character - The keyboard character used to escape from
current line input.
ASCII-number - ASCII decimal equivalent. (Range: 0-255)
character - Any valid keyboard character.
history - The number of lines stored in the command buffer, and
recalled using the arrow keys. (Range: 0-256)