Edge-Core ES3528MV2, Management Manual

Page: 1090 / 1480

C
HAPTER
34
| Spanning Tree Commands
– 1090 –
C
OMMAND
U
SAGE
If at any time the switch detects STP BPDUs, including Configuration or
Topology Change Notification BPDUs, it will automatically set the selected
interface to forced STP-compatible mode. However, you can also use the
spanning-tree protocol-migration command at any time to manually
re-check the appropriate BPDU format to send on the selected interfaces
(i.e., RSTP or STP-compatible).
E
XAMPLE
Console#spanning-tree protocol-migration eth 1/5
Console#
show spanning-tree
This command shows the configuration for the common spanning tree
(CST), for all instances within the multiple spanning tree (MST), or for a
specific instance within the multiple spanning tree (MST).
S
YNTAX
show spanning-tree [ interface | mst instance-id | brief |
stp-enabled-only ]
interface
ethernet unit / port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28)
port-channel channel-id (Range: 1-12)
instance-id - Instance identifier of the multiple spanning tree.
(Range: 0-4094)
brief - Shows a summary of global and interface settings.
stp-enabled-only - Displays global settings, and settings for
interfaces for which STP is enabled.
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
◆
Use the show spanning-tree command with no parameters to display
the spanning tree configuration for the switch for the Common
Spanning Tree (CST) and for every interface in the tree.
◆
Use the show spanning-tree interface command to display the
spanning tree configuration for an interface within the Common
Spanning Tree (CST).