Eddyfi Technologies TSC U41, User Manual

Page: 45 / 72

Assist3 Software
| 33
File Transfer
Transfer files between the program and a USB mass storage device. Files can also be deleted
using this function. A new file or “page” of data is created every time
Run
is pressed. Files are
collected in subfolders labelled by
Component
name, which are collected within top level
folders labelled by Site name. The filename for each page is based on the
Part ID,
the type of
Scan
(function check [F] or general [G]), the Line (toe 1, weld cap, HAZ, etc) and page number.
For example:
Part ID F TO1 001A Function Check on toe 1, page 1.
Part ID G CAP 002A General inspection scan on the cap, page 2.
Part ID G HAZ 003A General inspection scan on the HAZ, page 3.
Files can be transferred at the component level or the site level, in which case multiple
components, contained within the “Site” folder can be transferred simultaneously.
Start/Resume
Takes the user to the frontstage.