SE-601 Series Electrocardiograph User Manual System Setup
- 44 -
2.
USB printing is ineffective in the auto periodic sampling mode, auto
11~60s sampling mode, manual mode and R-R analysis mode.
3.
Make sure that paper is installed in the USB printer before printing. Error
may occur if no paper is loaded in the USB Printer.
4.
You should connect the corresponding USB printer to the
electrocardiograph.
5.
Print Out
configuration is effective only under the AUTO or RHYT mode.
WARNING
If the printer used is not the type listed above, additional safety measures (such as
applying an isolation transformer to supply the medical system) should be taken when the
safety of the medical system has not been evaluated. If in doubt, consult our technical
service department or your local distributor.
CAUTION
It is forbidden to connect or disconnect a U disk or a USB printer during the transmission
course.
10.3.2 Setup 2
Items
Default
Default
(Only in the U.S.)
Measure / Analysis
On
On
Template / Position Marker /
Time Scale / Minnesota
Code / Device No.
Off
Off
Baseline Adjustment
Horizontal
Horizontal
RR Interval List
Off
Off
Grid of Thermal Report
Off
Off
Grid of USB Report
On
On
Prompt
Confirmed By
Confirmed By
