SE-601 Series Electrocardiograph User Manual Managing Orders
- 38 -
NOTE:
1. The order function is only configurable for SE-601B/C.
2. To use the order function, the ECG data management software (DMS) of EDAN must
be installed in the PC.8.1 Loading Orders
Once the electrocardiograph is turned on, you can open the
Order Manager
screen by pressing
Patient
if orders without examination exist on the
Order Manager
screen.
After you press
Examine
on the
Order Manager
screen to return to main screen1, you cannot
open the
Order Manager
screen by pressing
Patient
until you complete an order examination
next time.
To load order information:
1.
On the electrocardiograph, configure the
Order Setup
screen.
2.
Connect the electrocardiograph to the PC installed with the DMS by using an Ethernet cable
recommended by the manufacturer.
3.
Set
Server IP
,
Local IP
,
Gateway
and
Subnet Mask
in the
Transmission Setup
window.
For details, please refer to Section 10.5 "Transmission Setup".
4.
Select
Load
on the
Order Manager
screen to load orders from the DMS.
If
Auto Refresh
is enabled in Order Setup, the system will automatically refresh the order
information every time you enter the
Order Manager
screen.
NOTE:
If orders are modified on the DMS, the corresponding orders existing on the
Order Manager
screen will be refreshed after you load orders from the
software.
