SE-601 Series Electrocardiograph User Manual Basic Operation Guidance
- 31 -
For the electrocardiograph configured with the touch screen, you can touch the displayed
information to modify corresponding settings.
NOTE:
1. The modification of filter, gain, or speed on the main screen is only effective for the
current patient.
2. When the leads are off, the lead names will be highlighted.
3. Work mode can be selected by pressing the
MODE
key when the main screen is
displayed.
4.3 Work Mode Description
There are four work modes in SE-601 series electrocardiograph.
AUTO:
In the auto mode, the ECG data can be analyzed, saved, printed and
transmitted. The lead groups are switched automatically according to the
lead sequence during the printing course. After the ECG waves of one lead
group are printed within a certain time, the system switches to print ECG
waves of another lead group automatically. 1mV calibration marks will be
printed at the beginning of an ECG report.
MANU:
In the manual mode, you can determine the lead group to be displayed and
printed. Pressing
Tab
can switch among the lead groups.
RHYT:
In the rhythm mode, the ECG data can be saved and transmitted. You can
print 60s rhythm-lead ECG waveform of one lead in the
Single Lead
style
or 20s rhythm-lead ECG waveform of three leads in the
Three Leads
style.
R-R:
In the R-R analysis mode, you can select a lead to print its R-R histogram,
R-R trend chart, 180s compressed ECG waveform and all the R-R interval
values.
