29
ECOWATER
S Y S T E M S
Optional Remote Operation
CHANGING WHICH DATA ITEMS ARE DIS-
PLAYED IN THE STATUS SCREENS
Each device added to the remote (conditioner/refiner,
drinking water system, etc.) has a status screen which
the remote displays during normal operation. The sta-
tus screen may be customized by turning items on or
off.
On the remote, the conditioner/refiner’s status screen,
for example, will include a
Status
line and may also
include any or all of the optional data items in the list
below. The frequency with which data is updated on
the remote depends on the data item:
REMOTE DISPLAY
DATA ITEM
UPDATED EVERY
=
Out of salt in (days). . . . . . . . . . . . 7 hours
=
Soft water left (gallons). . . . . . . . . 10 min.
=
Soft water left (liters). . . . . . . . . . . 10 min.
=
Average daily use (gallons) . . . . . 7 hours
=
Average daily use (liters) . . . . . . . 7 hours
=
Total minerals removed (lbs) . . . . 7 hours
=
Total minerals removed (kg). . . . . 7 hours
=
Capacity remaining (%). . . . . . . . . 10 min.
=
Salt level . . . . . . . . . . . . . . . . . . . . . 10 min.
=
Total soft water (gallons) . . . . . . . 10 min.
=
Total soft water (m
3
) . . . . . . . . . . . 10 min.
=
Water used today (gallons). . . . . . 10 min.
=
Water used today (liters). . . . . . . . 10 min.
To turn data items on or off:
1
. Press the remote’s LEFT (
3
) or RIGHT (
4
) buttons
to manually advance to the status screen you want to
customize. For example, to change the data for the
conditioner/refiner, manually advance to the
EWS
3500
status screen.
2
. Press the remote’s SELECT (
¡
) button to display the
device menu.
3
. Press the DOWN (
6
) button to scroll through the
menu options until
Display data
is highlighted in a
box (See Figure 118).
4
. Press the SELECT (
¡
) button to display the Display
data screen (See Figure 119).
5
. Press the DOWN (
6
) or UP (
5
) buttons to scroll
through the list of display data items. Items with a
check mark in the box next to them will be displayed
during normal operation.
6
. To select an unchecked display data item, make sure
the box next to the item’s name is highlighted (box is
black inside). Then press the SELECT (
¡
) button.
The check mark will appear in the box.
7
. To un-select a checked display data item, make sure
the box next to the item’s name is highlighted (box is
black inside). Then press the SELECT (
¡
) button.
The check mark will disappear.
8
. When selections are complete, exit this menu by
pressing the LEFT (
3
) button. The display will go
back to the device menu (Figure 118).
9
. Press the LEFT (
3
) button to exit this menu, or wait
30 seconds for it to exit automatically.
FIG. 118
FIG. 119
OUT OF SALT IN (X) DAYS
This display, on both the conditioner/refiner and remote
status screens, is an
estimate
of the number of days
until the conditioner/refiner will be out of salt. This esti-
mate is based on salt level in the brine tank, salt dose
used, and average daily water use. It is recalculated
when the conditioner/refiner regenerates, and the num-
ber of days may decrease, remain the same or even
increase at regeneration time (a drop in water use could
cause the estimated days left to increase). Between
regenerations it will count down.