21
FIG. 83
FIG. 84
8
. Press the UP (
5
) or DOWN (
6
) buttons to set the
number of months until the service reminder
appears. Repeatedly pressing the DOWN (
6
) but-
ton until the display reads “Off” turns this feature off
and zeros the number of months and days.
9
. Press the SELECT (
¡
) button. The display will go
back to the Special features menu (Figure 83).
10
. Press the LEFT (
3
) button three times to return to
the rolling status screens.
6
. Press the DOWN (
6
) button to scroll through the
menu options until
Service reminder
is highlighted.
7
. Press the SELECT (
¡
) button to display the Service
reminder screen (See Figure 84).
FIG. 82
SEND E.A.S.E. MESSAGE
With E.A.S.E. (Electronic Automated Service
Evaluation), a homeowner or service technician can
transmit operational data via a telephone for diagnostic
purposes. Ask your participating EcoWater Systems
dealer for more information.
To send an E.A.S.E. message:
1
. From any of the rolling status screens, press the
SELECT (
¡
) button to display the
Main menu
.
2
. Press the DOWN (
6
) button to scroll through the
menu options until
Advanced settings
is highlighted.
3
. Press the SELECT (
¡
) button to display the
Advanced settings menu (See Figure 85).
FIG. 86
FIG. 87
6
. Make sure
Send EASE message
is highlighted.
7
. With the phone ready, press the SELECT (
¡
) button
to display the Send EASE message screen and
begin transmission.
8
. Hold the phone’s receiver an inch or two above the
E.A.S.E. port on the conditioner/refiner’s faceplate
(See Figure 7 on Page 8). Maintain the receiver
steadily in this position during the entire transmis-
sion.
9
. A bar is displayed showing the transmission’s
progress (See Figure 87). Once completed, the
Troubleshooting screen immediately reappears
(Figure 86).
10
. Press the LEFT (
3
) button three times to return to
the rolling status screens.
FIG. 85
4
. Press the DOWN (
6
) button to scroll through the
menu options until
Troubleshooting
is highlighted.
5
. Press the SELECT (
¡
) button to display the
Troubleshooting menu (See Figure 86).
ECOWATER
S Y S T E M S
Conditioner/Refiner Operation
SERVICE REMINDER (set / reset)
Use this feature to program the number of months (up
to 24) before a “Service overdue” message will appear
instead of the rolling status screens (See Figure 82).
This message also appears on the remote. This will be
a reminder to call your dealer for service. Once pro-
grammed, this feature displays the number of months
and days left until the service reminder.
Once the “Service overdue” message has appeared,
dealers performing service clear it by setting the num-
ber of months until the next service reminder. Set or
reset the service reminder as follows:
1
. From any of the rolling status screens, press the
SELECT (
¡
) button to display the
Main menu
.
2
. Press the DOWN (
6
) button to scroll through the
menu options until
Advanced settings
is highlighted.
3
. Press the SELECT (
¡
) button to display the
Advanced settings menu.
4
. Press the DOWN (
6
) button to scroll through the
menu options until
Special features
is highlighted.
5
. Press the SELECT (
¡
) button to display the Special
features menu (See Figure 83).
