www.ecosmartfire.com
ENGLISH
Left Corner & Right Corner
Installation
Equipment required: Power Drill, Screwdriver, Level, Hand Trowel for
Plaster, Silicone Gun, Caulk Gun
1. Construct a main wall framework leaving an opening as shown in
Table B. The base of the frame can be a solid bench/platform, which
will assist in leveling up the appliance when in position.
NOTE: Illustrations are of Left Corner installation.
Table B: Framework Opening Sizes
Physical appliance dimensions should be verified against cut out dimensions BEFORE
installation begins to confirm tolerances align.
APPLIANCE
(LC & RC)
W
mm [in]
D
mm [in]
H
mm [in]
Weight*
kg [lbs]
FLEX18LC
470 [18.5]
365
[14.4]
730 [28.7]
33 [72.6]
FLEX32LC
902 [35.5]
365
[14.4]
730 [28.7]
48.8 [107.4]
FLEX42LC
1157 [45.5]
365
[14.4]
730 [28.7]
63.3 [139.3]
FLEX50LC
1362 [53.6]
365
[14.4]
730 [28.7]
71.6k [157.5]
FLEX50LC.BX
1362 [53.6]
365
[14.4]
730 [28.7]
73.1 [160.8]
FLEX60LC.BX
1617 [63.7]
365
[14.4]
730 [28.7]
87.1 [191.6]
FLEX68LC
1822 [71.7]
365
[14.4]
730 [28.7]
100.3 [220.7]
FLEX68LC.BX
1822 [71.7]
365
[14.4]
730 [28.7]
95.3 [209.7]
FLEX68LC.BX2
1822 [71.7]
365
[14.4]
730 [28.7]
97kg [213.4]
FLEX78LC.BX2
2077 [81.8]
365
[14.4]
730 [28.7]
111 [244.2]
FLEX86LC
2282 [89.8]
365
[14.4]
730 [28.7]
121.7 [267.7]
FLEX86LC.BX
2282 [89.8]
365
[14.4]
730 [28.7]
122.6 [269.7]
FLEX86LC.BX2
2282 [89.8]
365
[14.4]
730 [28.7]
119 [261.8]
FLEX104LC
2742 [107.9] 365
[14.4]
730 [28.7]
149.5 [328.9]
FLEX104LC.BX
2742 [107.9] 365
[14.4]
730 [28.7]
145.4 [319.9]
FLEX104LC.BX2 2742 [107.9] 365
[14.4]
730 [28.7]
146.9 [323.2]
FLEX122LC
3202 [126.1] 365
[14.4]
730 [28.7]
171.7 [377.7]
FLEX122LC.BX
3202 [126.1] 365
[14.4]
730 [28.7]
173.4 [381.5]
FLEX122LC.BX2 3202 [126.1] 365
[14.4]
730 [28.7]
169.1 [372]
FLEX140LC.BX
3662 [144.2] 365
[14.4]
730 [28.7]
197.1 [433.6]
FLEX140LC.BX2 3662 [144.2] 365
[14.4]
730 [28.7]
195.4 [429.9]
FLEX158LC
4122 [162.3] 365
[14.4]
730 [28.7]
225.5 [496.1]
FLEX158LC.BX2 4122 [162.3] 365
[14.4]
730 [28.7]
219.1 [482]
* Appliance weight includes burner/s (dry weight excluding fuel), glass charcoal and glass. It
does NOT include glass charcoal for side boxes.
IMPORTANT: The framing above the appliance must be self-
supporting. The appliance is not load-bearing.
2. Slide the appliance inside the framing cavity (the base of the
appliance can sit directly on top of the 2 x 4 framing material). The
appliance is shipped with red stability bracket(s) installed on the open
side(s) to keep the appliance square while in transport and during
installation. Keep the bracket(s) on while framing up the setting to
assist in minimising movement of the appliance. Align the top corner
flange extension panel with the threaded holes on top shelf and
screw into place with the included screws
3. Secure the appliance to the framework using the existing mounting
holes on the appliance flanges. Make sure that the appliance is level
before securing it in place.
4. Remove the red safety bracket(s).
