www.ecosmartfire.com
ENGLISH
Bench
Installation
Equipment required: Power Drill, Screwdriver, Level, Hand Trowel for
Plaster, Silicone Gun, Caulk Gun
1. Construct the main framework using the dimensions shown on Table
G. The base of the frame can be a solid bench/platform, which will
assist in leveling up the appliance when in position. When planning
construction, ensure that there is a minimum of 1500mm (59.1”)
overhead clearance from the burner opening to the ceiling.
WARNING: This four-sided appliance cannot be inserted into
a wall structure. It must be installed on a separate framework
securely anchored to the floor. Do not install on moveable
or weak structure. Four-sided appliances are designed as
wall divider inserts. If you do not comply with this installation
instruction, the structure could overheat and catch fire.
Table G: Framework Sizes
Physical appliance dimensions should be verified against cut out dimensions BEFORE
installation begins to confirm tolerances align.
APPLIANCE
W
mm [in]
D
mm [in]
Weight*
kg [lbs]
FLEX18BN
455 [17.9]
349 [13.6]
18.3 [40.2]
FLEX32BN
887 [34.9]
349 [13.6]
27.5 [60.6]
FLEX42BN
1142 [45]
349 [13.6]
33.8 [74.4]
FLEX50BN
1347 [53]
349 [13.6]
39.5 [86.9]
FLEX50BN.BX
1347 [53]
349 [13.6]
38.4 [84.5]
FLEX60BN.BX
1602 [63.1]
349 [13.6]
44.7 [98.4]
FLEX68BN
1807 [71.1]
349 [13.6]
50.3 [110.6]
FLEX68BN.BX
1807 [71.1]
349 [13.6]
61.1 [134.5]
FLEX68BN.BX2
1807 [71.1]
349 [13.6]
49.3 [108.5]
FLEX78BN.BX2
2062 [81.2]
349 [13.6]
55.6 [122.4]
FLEX86BN
2267 [89.3]
349 [13.6]
71.6 [157.5]
FLEX86BN.BX
2267 [89.3]
349 [13.6]
61.1 [134.5]
FLEX86BN.BX2
2267 [89.3]
349 [13.6]
61.3 [134.8]
FLEX104BN
2727 [107.4]
349 [13.6]
80 [176]
FLEX104BN.BX
2727 [107.4]
349 [13.6]
82.5 [181.5]
FLEX104BN.BX2
2727 [107.4]
349 [13.6]
72 [158.5]
FLEX122BN
3187 [125.5]
349 [13.6]
105.6 [232.4]
FLEX122BN.BX
3187 [125.5]
349 [13.6]
90.9 [200]
FLEX122BN.BX2
3187 [125.5]
349 [13.6]
93.4 [205.5]
FLEX140BN.BX
3647 [143.6]
349 [13.6]
116.5 [256.3]
FLEX140BN.BX2
3647 [143.6]
349 [13.6]
101.8 [224]
FLEX158BN
4107 [161.7]
349 [13.6]
118.8 [261.4]
FLEX158BN.BX2
4107 [161.7]
349 [13.6]
127.4 [280.3]
* Appliance weight includes burner/s (dry weight excluding fuel), glass charcoal and glass. It
does NOT include glass charcoal for side boxes.
2. Remove the extension flange from the firebox so that both sides are
the same height. This will help make sliding the firebox into the frame
easier. Pay attention not to lose the screws, they will be needed again
when the flange is re-installed.
3. Slide the appliance inside the framing cavity (the bottom tray can sit
directly on top of the frame).
FRONT VIEW
4. Align the flange extension panel with the threaded holes on the
appliance. Screw it into place using the included screws (bottom row
onto appliance, top row onto framing material) to secure it into position.
BACK VIEW
5. Fix the appliance to the framework with screws using the existing
mounting holes on the appliance flanges. Make sure that the
appliance is level before securing it in place.
