1
6200-002
REV. A
04.16.2009
www.fireplaces.com
Assembly / Installation Guide
Kenwood Flush mantel
PLEASE READ
These instructions apply only to the cabinetry and facing material that will surround the firebox.
PLEASE SEE THE FIREPLACE MANUFACTURER’S INSTALLATION INSTRUCTIONS TO ENSURE THAT ALL CLEARANCE AND
INSTALLATION REQUIREMENTS ARE BEING MET.
Notice !!
Warning !!
For field finishing the following
two products have been
approved for use on this
product:
1. Lacquer - Sherwin Williams
“Wood Classics A68F90”.
2. Paint - Sherwin Williams
“Duration Home A98W151
Interior Latex Paint”.
All other products may result
in discoloration or undesired
results.
•
Improper installation,
adjustment, can cause injury
or property damage. For
assistance or additional
information, consult a
qualified installer, service
agency, or the gas supplier.
•
Comply with all minimum
clearances to combustibles
as specified in firebox manual.
Failure to comply may cause
house fire.
Kenwood mantel with optional base.
Note: Using the base will raise the fireplace by 9-1/4” above
finished floor level. All dimensional requirements of fireplace
installation should be ajusted accordingly.
Kenwood mantel without optional base.
