Installation and User Manual. Version V03.B03_EN (23/09/2015)
ecoGEO
13
ECOFOREST Geotermia
Nº
Descripción
Nº
Descripción
1
Tank module
6
Brine outlet
(G1’’ F)
2
Heat pump module
7
Brine inlet
(G1’’ F)
3
Front panel
8
DHW outlet (G
1’’ F)
4
Heating-
cooling outlet (G1’’ F)
9
Mains
water inlet (G1’’ F)
5
Heating-cooling inlet
(G1’’ F)
10
Power supply input
Figura 3.3. Dimensions and connections of ecogGEO C heat pumps.
3.4. MAIN COMPONENTS
The main components and their position for the different models of ecoGEO B heat pump range are outlined
below.
The Figure 3.4 shows the location of the main components of ecoGEO B1 heat pumps.
No
Description
No
Description
1
Electrical panel
14
Brine safety valve (3 bar)
2
Condenser
15
Heating safety valve (3 bar)
3
Evaporator
16
Brine circuit drain valve
4
Inverter compressor
17
Heating circuit drain valve
5
Combi filter dryer
18
Compressor suction temperature probe
6
Electronic expansion valve
19
Brine outlet temperature probe
7
High-pressure switch
20
Brine inlet temperature probe
8
Low-pressure switch
21
Heating outlet temperature probe
9
Brine circulation pump
22
Heating inlet temperature probe
10
Heating circulation pump
23
Discharge pressure transducer
11
Heating/DHW 3-way valve
24
Suction pressure transducer
12
Brine expansion vessel (5 litters)
25
Brine pressure transducer
13
Heating expansion vessel (12 litters)
26
Heating pressure transducer
Figure 3.4. Component location in ecoGEO B1 models.
