Installation and User Manual. Version V03.B03_EN (23/09/2015)
ecoGEO
40
ECOFOREST Geotermia
MENU 2.2.6.11. BUFFER TANK / OUTLET TEMPERATURE Z2
In 2 ZONES scheme show the type of temperature sensor installed in the outlet temperature for
Zone 2 of the heating-cooling circuit and its current reading. In scheme BUFFER TANK shows
the type of temperature sensor installed in the buffer tank and its current reading. It also allows
entering a correction for the sensor reading.
MENU 2.2.6.12. OUTSIDE TEMPERATURE
It shows the type of outside temperature sensor and its current reading. It also allows entering a
correction for the sensor reading.
MENU 2.3. MANUAL TEST
MENU 2.3.1. BRINE PUMP
This allows activating/deactivating manually the brine pump and adjusting its percentage of
rotation speed.
MENU 2.3.2. HEATING PUMP
This allows activating/deactivating manually the heating-cooling pump and adjusting the
percentage of rotation speed.
MENU 2.3.3. INVERTER CONTACTOR
This allows activating/deactivating manually the contactor to activate the inverter. The activation
of the inverter doesn
’t imply the compressor start, it only allows verifying that the inverter is
properly energized.
MENU 2.3.4. ELECTRIC HEATER CONTACTOR
This allows activating/deactivating manually the legionella protection electric heater. The electric
heater is deactivated automatically when exiting the menu 2.4.7. MANUAL TEST.
MENU 2.3.5. DHW VALVE
This menu is available only in the models ecoGEO B1 and ecoGEO B2. This allows
activating/deactivating manually the 3-way valve for DHW production. The value ON positions
the valve in DHW mode and the value OFF positions the valve in HEATING mode.
MENU 2.3.6 DHW PUMP
This menu is available only in the model ecoGEO B3. This allows activating/deactivating
manually the circulation pump and the solenoid valves of the DHW production system (CHW
system).
MENU 2.3.7. FREE COOLING VALVE
This menu is available only in the model ecoGEO B2. This allows activating/deactivating
manually the free cooling 3-way valves. The value ON positions the valves in FREE COOLING
mode and the value OFF positions the valve in HEATING/DHW mode.
MENU 2.3.8. POOL
This allows activating/deactivating manually the 3-way derivation valve to the pool heat
exchanger. The position of the valve for the values ON/OFF depends on its hydraulic installation.
