Installation and User Manual. Version V03.B03_EN (23/09/2015)
ecoGEO
35
ECOFOREST Geotermia
MENU 1.8.10. MONTH ENERGY METERES
It shows the energy values explained on the previous screen accumulated during a month.
MENU 1.8.11. YEAR ENERGY METERES
It shows the energy values explained on the previous screen accumulated during a year.
MENU 1.8.12. VERSION
It shows information on the application version, the BIOS and the expansion valve drivers installed in
the heat pump.
MENU 1.9. ALARMS
This menu can be quickly accessed by pressing key [Alarm] from the home screen.
MENU 1.9.1. ALARMS
It shows the alarms that are currently activated. All the alarms included in this menu do not enable to
start the compressor. If the cause of the alarm is solved, it will automatically disappear from the
menu and the compressor can be restarted. There are some alarms that, if repeating five
subsequent times, will trigger the locked alarm preventing the heat pump from starting until the
active permanent alarm is manually removed.
MENU 1.9.2. RESET ALARMS
It allows removing manually the permanent alarms caused by five consecutive alarms due to the
same cause.
MENU 1.9.3. ALARM LOG
Provides access to the record of all alarms that occurred during the period of operation of the heat
pump, indicating the date and time they were activated.
This alarm log can be deleted from menu 2. INSTALLER.
4.6. INSTALLER MENU
Table 4.3 shows the submenu structure for menu 2. INSTALLER.
2. INSTALLER menu
Level 1 submenu
Level 1 submenu
Level 1 submenu
2.1. Language
2.2. Configuration
2.2.1. Heat pump model
2.2.2 Source
2.2.3. Services
2.2.3.1. Heating/cooling
2.2.3.2. DHW
2.2.3.3. Pool
2.2.3.4. Special programs
2.2.4 Remote control
2.2.4.1. HP remote control
2.2.4.2. DHW switch
2.2.4.3. Program switch
2.2.4.4. BMS configuration
2.2.5. Protections
2.2.5.1. Compressor capacity
2.2.5.2. Brine alarm
