ENGLISH
Instruction manual MECHANIKA & TECHNIKA PROFI DUE
22
Important
Make sure that the water supply installation is connected to potable water supply with an operating
pressure ranging from 0 to 2 bar. In case of an operating pressure of more than 2 bar use a pressure
regulator.
Please note that often the pressure of the water supply varies. If the water supply pressure temporarily
exceeds 2 bar, use a pressure regulator.
Position “0”: water tank
Position “1”: direct water supply
Machine in use with water supply connection
Connect the water connecting hose to the water supply valve (image 1).
For using the machine with direct water supply, please turn the valve to the side of the water supply valve (image 1).
The water supply valve is located beneath the bottom of the drip tray (image 1). Additionally, put the switch behind
the drip tray into position “1” (image 2). Please make sure that the water tap is always open during the water-
connection use so that the machine never runs out of water!
image 1
image 2
Valve in position for operating machine
with direct water supply
Put switch into position “1” for direct
water supply
Water tank adapter
Machine in use with water tank
For using the machine with water tank, please turn the valve into the direction of the machine foot (image 1).
Additionally, put the switch behind the drip tray into position “0” (image 4).
image 3
image 4
Valve in position for operating machine
with water tank
Put switch into position “0“for
operating machine with water tank
Machine foot
Summary of Contents for Mechanika IV Due
