ENGLISH
Instruction manual MECHANIKA & TECHNIKA PROFI DUE
19
1 PRODUCT
DELIVERY
1 filter holder 1 spout
1 filter holder 2 spouts
1 filter 1 cup
1 filter 2 cups
1 blind filter
1 measuring-spoon
1 coffee tamper
1 instruction manual
1 cleaning brush
1 flexible hose for fresh water supply: 1/8 zoll connection for m 3/8 zoll for connection waterpipe
2 GENERAL
ADVICE
2.1 General safety notes
•
Make sure that the local main supply voltage corresponds to the information given on the type
plate on the front panel of the espresso machine.
•
Carry out the installation of the machine according to the instruction in chapter 4.
•
Plug the machine only into an earthed socket and do not leave it unattended.
•
Do not roll or bend the power cord.
•
Do not use an extension cord/ do not use a multiple socket.
•
Place the machine on an even and stable surface. You can regulate the height of the machine by
adjusting the feet of the machine.
•
Never place the machine on hot surfaces.
•
Never immerse the machine in water; do not operate the machine with wet hands
•
Machine should only be used by instructed adult persons.
•
Machine is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
•
Children should be supervised to ensure that they do not play with the appliance.
•
Do not expose the machine to the effects of weather (frost, snow, rain) and do not use it
outdoors.
•
Keep the packing out of the reach of children.
•
Only use original spare parts.
•
Do not operate the machine with carbonated water, but with soft potable water.
•
Do not operate the machine without water.
If you have any further questions or if you require any further information, please contact your specialised dealer
before starting up the espresso coffee machine.
Our machines comply with the relevant safety regulations.
Any repairing or change of single components must be carried out by an authorised specialised dealer.
If the supply
cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to
avoid a hazard.
In case of non-observance the manufacturer does not assume liability and is not liable to recourse.
Ask for authorised service points outside Europe.
See page 1 for your specialised dealer’s contact details.
Where necessary, make use of a water softener / water filter cartridge in order to reach an adequate
hardness degree. If these measures are insufficient, a prophylactic descaling of the machine is
possible. Contact your specialised dealer
before
undertaking this measure.
Summary of Contents for Mechanika IV Due
