MAINTENANCE AND SERVICING
Damaged equipment may cause serious personal injury. Do not use damaged
equipment. If abnormal noise or vibration occurs, have the problem corrected before
further using.
1.
Before each use,
inspect the general condition of the tool. Check for loose screws,
misalignment or binding of moving parts, cracked or broken parts, or any other
condition that may affect its safe operation.
2.
After using,
clean external surfaces of the tool with clean, moist, rub rust preventing
oil on the metal surface of the tool and the dies to avoid rusty. Store the tool in the dry
environment.
3.
Service to the tool should only be done by a qualified Service Technician.
4.
In order to prolong the life of the tool please change the oil per year. Make sure the oil
filtered by 120 mesh net or over 30µm strainer. Meantime avoid the dusty into the oil
cup.
5.
After a long time using, the sealing kits will be damaged, if there is leakage please
contact with the manufacturer and/or the distributor to change the sealing kits.
j.
The best temperature for charging is between 10
℃
-40
℃
. Make sure the air hole
of the battery and charger are uncovered during charging.
k.
Please cut off the power of the charger each time to reduce the hazard from child
or the person who not expert on the tool.
l.
Do not wait until the battery runs over for recharging, the recharging will caused
the battery does not working anymore. Please keep the battery out of the tool to
avoid the power discharge.
m.
Please do not burn the battery or make it being short-circuited, it may cause
explosion.
n.
Do not use the waste battery otherwise it will caused the electric shock.
o.
Do not disassemble the battery and charger. If any problem please contact with
manufacture or agent.
3.
Personal safety
p.
Stay alert, watch what you are doing and use common sense when operating the
tool. Do not use the tool while you are tired or still under the influence of drugs,
alcohol or medication. A moment of inattention may result in series personal
injury.
q.
Use safety equipment. Always use safety equipment such as mask, helmet, safety
cap,
insulating shoes and etc to reduce the risk of personal injury.
r.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing
and gloves away from moving parts. Loose clothes jewelry or long hair can be
caught in moving parts.
s.
Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the tool operation. If
damaged, have the tool repaired before use. Many accidents are caused by poorly
maintained power tools.
t.
Please use the tool properly, the tool with correct power will do the job better and
safer at the rate for which it was designed.
u.
Do not put your fingers into the head of the tool during operating. Your fingers
could be pinched very severely.
