The battery can be charge cycled hundreds of times, when the charge time is reduced
considerably, change to a new battery.
Please charge the battery in time to avoid it to be used up completely; otherwise it will
become useless forever. If the battery not be used for a long time, it will discharge
automatically, so take it out of the tool and make sure to charge it one time per/each
quarter.
2. Usage of the tool
1.
LCD board instruction:
2.
LCD board showing and setting:
Please note: tool in power off , there is no any data showing.
Power on
Press
for 3 s, the tool into starting status, the
keyboard showing all the data for 1 s, then the tool is self
inspecting for 1 s. the data will be changed and increased in
order
Exchange
showing
In the power on status, press
, the data exchange
3.
Function description
MCU –automatically detect the pressure during operation and provide
Security protect, shut off the motor and reset automatically after
operation.
Auto reset- Release the pressure automatically, retract the piston to the
starting position when reached the max output.
One key control- press the trigger to start working, half pressing the trigger
means stop forcing pressure, letting go fully means piston returns to the
original position.
The unit is equipped with a double piston pump which is characterized
by a rapid approach of the die towards the connector and a slow crimping
motion.
The head can be smoothly turned by 350° around the longitudinal axis
in order to gain better access to tight corners and other difficult working
areas.
Suspend—finish working or withdraw the hand from the trigger or any
accident happened, the device inside of the tool can stop power supply.
One significant sound will be heard and a red display flashes if any error
occurs or lower power being.( Ref. table 1)
Per time pressing on the trigger, the LED will lighting for 20 seconds.
High-performances Li-ion battery in strong power supply, No discharge
memory effect., Ultra lower power consumption standby design keep the
tool 6 months storage, meanwhile over discharge device prolong the life
span of the battery.
A temperature sensor makes the tool stop working automatically when
the temperature over 60
˜
under long time working, the fault signal
