GENERAL SAFETY RULES
TO WORK IN SAFE CONDITIONS WITH THIS TOOLING, IT IS IMPERATIVE TO
READ CAREFULLY THE DIRECTIONS FOR USE AND TO FOLLOW THE
INSTRUCTIONS IT CONTAINS. IF YOU DO NOT RESPECT THE INFORMATION
WRITTEN IN THAT INSTRUCTION MANUAL THE WARRANTY WILL BE
CANCELED.
1. Work area safety
a.
Keep work area clean and clear. Cluttered or dark areas invite accidents.
b.
This tool is not insulated; please do not use it on live conductors.
c.
Please do not use or store the tool under high temperature, or one filled with
corrosive fluid. Pay attention to the sealing kits becoming aged and worn out.
d.
Keep children and bystander away while operating the battery powered crimping
tool. Distractions will cause you to lose control.
e.
Do not use or charge the tool around flammable, explosive environment
2. Electrical safety
f.
Make sure the plug matches with the plug socket. Never make any changes on
the plug.
g.
Do not put tool, battery and charger in rainy or humid surroundings, it is easy to
trigger an electric shock accident if any water gets into the electric system of the
tool.
h.
Do not use electric cord to carry, pull, or to pull out the plug and do not connect
the “-” to “+”, damaged or twisted wire may cause an electric shock accident.
i.
If the charger was dropped or crashed to the floor, please do not try to repair it by
yourself, send it back to the authorized service center as soon as possible. The
damaged charger may cause an electric shock accident.
j. If the tool not used for a long time, please make sure the piston stays on its starting
position, clean up the tool and rub rustproof oil both to the tool and accessories. Take
out the battery and put it into the box and store the tool in a dry surrounding.
