sounds, it means the tool can’t continue working until the temperature
reduced to normal.
Micro computer control system with the feature of self-pressure detecting,
double protection during operation, counting and realize the exchange
between computer with data by the converter.
Table 1.
Series
No
Error code
Instruction
What it means
1
On ---
Self-checking
Self-checking to assure
everything is ok
2
E01
Overload
Hydraulic system may
be damaged and need
checking immediately
3
●●●
Charging
signal
Lacking power and
needs charging.
4
●
—5sec
Power lacking
warning
No power and needs
charging immediately
5
E02
Sensor
error
Temperature sensor and
power inspecting error
6
E03
●●●●
Temperature
warning
Temperature too high,
tool need to be cooled
7
E04
●●●●●
No pressure
Motor working but
without pressure
OPERATING INSTRUCTION
Read the entire SAFETY INFORMATION section at the beginning of this manual
including all text under subheadings therein before using this product.
Use this tool for the manufacture’s intended purpose only. Use other than that which is
described in this manual can result injury or property damage.
1.
Charging
Push battery into charger and connect the plug with the plug seat. Make sure the room
temperature is between 10
˜
-40
˜
。
The charging time is around 2 hours. Please see the
illustration below.
The detail of the charging information, please refer the manual (MANUAL FOR
CHARGER)
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
